5 Reasons Why Your Air Conditioner Stopped Working
The greatest troubles of burning heat are an AC unit that is not working properly. There may be several reasons behind the air conditioning, some of which are non-technical and some technologies. However, in some cases, the maintenance cannot work, you may need to replace your air conditioner with new air conditioners. So, if your air conditioner is not working properly, this is the five most common causes of your AC may not work properly:
1. Clogged
air filter
The AC unit is not able to cool the air due to the blocked air filter. In this case, air does not flow through the filter, which strongly affects the cooling potential of the air conditioner. Depending on the condition of the filter, you may need to completely clear or replace it. Cleaning the air filter is easy. All you have to do is take out the filter and wash it and put it back in once you dry.
2. Dirty
coils
Are you dissatisfied with the temperature in the room, even after the air conditioner is turned about an hour? The condenser coil may be covered a debris. The condenser is working like a heat sink, and after removing heat from the air, it will dissipate external heat. However, it often captures dust, if accumulated, it will affect its performance. The gradual change of the condenser coil is the lower the efficiency. Debris will also work more effort to cool the room to consume more power, but there is no effectively cooling room.
3. High
atmospheric temperature
Every air conditioner has a certain working temperature, which can work most effectively. If the ambient temperature exceeds the optimum temperature limit, the efficiency of the air conditioner is significantly reduced. Sometimes, the surrounding temperature of the compressor is too high, and it completely stops working. People have another common mistake when installing air conditioners, and outdoor units are directly facing the sun. This can cause air conditioning to stop working or cool.
4. Insufficient Coolant
The coolant is the main part of the air conditioner, which is responsible for cooling the air while the evaporator coil cycle. If the level of the coolant is lowered, the air conditioner cannot be cooled. At this stage, you need to install air-conditioning installation technicians in Calgary AB, because in most cases, the coolant cannot be repaired.
5. Faulty Compressor
The compressor compresses the coolant and circulates the air by an evaporation coil. If your AC does not cool, a defective compressor may be the reason behind it, because the cooling cycle is broken without a working compressor. This is a problem that requires instant care because the compressor is the most expensive and important part of the AC. If your air conditioner does not work properly, please take professional help safer.
Additional Read: Stay Cool and Save Money with Our AC Hacks
Comments
Post a Comment